Preventing Auger Failures & Costly Out-of-Feed Events
By: Casey L. Bradley, Ph.D.
Swine producers know that a well-functioning feed delivery system is the backbone of their operation. When an auger fails and pigs go without feed, the consequences are immediate—and costly. Research has shown that even short-term feed interruptions can reduce growth rates, increase feed intake variability, and contribute to serious health risks such as gastric ulcers, ileitis, and hemorrhagic bowel syndrome (HBS).
A study by Linneen et al. (2007) found that just one out-of-feed event in nursery pigs resulted in significantly lower average daily gain (ADG) during the affected period. Meanwhile, Brumm et al. (2005) reported that out-of-feed events increase variation in pig growth and could lead to an additional day or more in time to market.
Beyond performance losses, health consequences can be severe. Pigs experiencing feed disruptions exhibit increased aggression, erratic feeding behaviors, and higher stress levels, which can lead to intestinal distress and increased mortality in severe cases.
As a swine nutritionist, I’ve meticulously studied, improved, and adapted diets to optimize pig performance for over two decades. Every decision in swine nutrition — from ingredient selection to formulation adjustments — ensures pigs receive the precise nutrients needed for growth and health.
However, even the most scientifically formulated diet is worthless if feed doesn’t reach the pigs. A single out-of-feed event due to a broken auger can derail productivity, disrupt growth, and compromise animal health.
PigTek, a leading systems provider to the pig industry, echoes the importance of maintaining consistent feed supply. According to Chris Elvidge, Engineering and Tech Service Manager, an out-of-feed event isn’t just an inconvenience — it’s a production failure that directly impacts performance, health, and profitability.
Spring Maintenance: The Best Defense Against Auger Failures
Preventing feed disruptions starts with spring maintenance and preparedness. As farms transition into warmer months, inspecting, repairing, and stockpiling essential parts for uninterrupted feed flow is critical.
PigTek’s Senior Marketing Specialist and seasoned swine producer, Randall Curless, believes that by catching small issues now, producers can prevent major breakdowns when they can least afford them. Spring is the perfect time to do a full system check, including the items listed below:
The Three Most Common Auger Failures & How to Prevent Them
- Motor Failures & Overheating: Overloaded augers and excessive wear on motors can cause overheating and failure.
Prevention:-
- Ensure motors are correctly sized for the auger load.
- Lubricate motor bearings regularly.
- Inspect electrical connections and replace worn-out wiring.
-
- Feed Bridging & Clogs in the System: Bridging in bulk bins prevents feed from flowing correctly, starving pigs despite full bins.
Prevention:-
- Use agitator balls and baffles to maintain feed flow.
- Adjust feed formulations to prevent excess fines and moisture buildup.
- Periodically check and clean bin interiors for residue buildup.
-
- Broken Flighting & Shear Pin Failures: Excessive wear on auger flighting and overloading can snap shear pins, halting feed delivery.
Prevention:-
- Inspect auger flighting for wear and tear every season.
- Keep spare shear pins on hand to quickly restore operation.
- Ensure feed bin boots and tubes are properly aligned to reduce stress on the auger system.
-
Essential Spare Parts Every Farm Should Have on Hand
The best way to minimize downtime is to stockpile key replacement parts before an emergency. PigTek’s Elvidge believes that farmers who keep a dedicated maintenance kit save hours of downtime when an issue arises. If producers have what they need on hand, a simple fix can take 10 minutes instead of shutting down operations for half a day. As a result, he recommends keeping the following items onsite at all times:
- Shear Pins & Bushings – The most common failure point and most straightforward to replace.
- Agitator Balls & Baffles – Critical for preventing bridging in bins.
- Anchor Bearings – A worn-out bearing can cause an auger to seize completely.
- Spare Auger Flighting (Short Sections) – Quick fixes can restore function until a permanent repair is possible.
- Grease & Gear Oil – Prevents excessive wear on moving parts.
- Basic Tools (Pipe Wrenches, Vice Grips, Volt Meter) – Ensures quick troubleshooting and repair.
The 5S Method: Organizing Auger Maintenance for Efficiency
Will Mabee, Vice President & General Manager of PigTek, suggests that disorganization is one of the biggest obstacles that gets in the way of proper maintenance. When everything has its place, the effort ends up being much more efficient. He recommends tapping into the “5S Method,” a core principle of Lean manufacturing designed to improve efficiency, accessibility, and workplace organization.
- Sort (Seiri) – Remove unnecessary tools and parts from the repair area.
- Set in Order (Seiton) – Designate a clearly labeled space for each tool and part, ensuring they are easy to find.
- Shine (Seiso) – Keep maintenance areas clean and free of dust that could damage equipment.
- Standardize (Seiketsu) – Create a checklist to track part usage and ensure that tools are returned to their designated locations.
- Sustain (Shitsuke) – Train all employees to use and maintain the system properly to prevent future inefficiencies.
Preventative Maintenance Saves Time, Money, and Stress
While managing farm operations, I’ve experienced firsthand the frustration of having to bucket-feed pigs by hand when an auger failed — a situation that could have been prevented with proactive maintenance.
Feed system failures also present serious safety risks for farm workers. Having grown up in agriculture, I’ve witnessed my father lose part of a finger in an auger accident.
These examples demonstrate how a well-maintained auger system is more than just a mechanical necessity — it’s a commitment to animal well-being, efficiency, worker safety, and the farm’s overall success.
In summary, out-of-feed events are avoidable with proper planning and routine maintenance. Producers can drastically reduce downtime by:
- Inspecting auger systems before peak feeding seasons.
- Stocking spare parts so breakdowns don’t lead to extended disruptions.
- Organizing repair tools and training employees to make quick fixes.
The bottom line? Preventative maintenance isn’t just good practice — it’s essential for keeping swine operations running smoothly. For personalized assistance and even more advice, reach out to your pig equipment manufacturer or local distributor. They work with these systems daily, understanding all the ins and outs, and they’d be happy to guide you on setting up a solid preventative maintenance schedule to help avert any out-of-feed events in your operation.